hack airtel gprs /internet

Hacking Airtel GPRS - You need a PC or a Laptop

You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle

1) Activate Airtel Live! ( It’s FREE so no probs)

2) Create TWO Airtel gprs data accounts (yep TWO) and select theFIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver foryour mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTIONWIZARD as follows

Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2#
Username and Password : blank

5) Configure your browser and download manager to use the proxy100.1.200.99 and port 8080.( My advice is to use Opera since youcan browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “AccessDenied…”(except for Airtel Live!). IT DOES NOT MATTER.Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,press ENTER and…….WAIT

9) After a few seconds the page will start to load and you have theWHOLE internet at your disposal.

hack idea gprs/internet

Here is the trick for the idea cellular to use internet into cell phone or in to laptop / pc.
This is trick for any cell phone means its not depended on the type or manufacturing of the cell phone, to get free access of internet you just need to follow the given steps:
1. This is compulsory step>>>you have to deactivate your GPRS/INTERNET if it’s active previously in your subscription.
2. Now after 24hrs of deactivation just again activate INTERNET in zero rental plan by sending sms of activation. After this send GP13 to 4444(AFTER 15.3.08 IT WILL BE GP15 to 4444).now again after 24hr (generally after 14hrs) you will have active internet but right now you will have it for FREE.

FOR THIS TRICK GIVEN POINTS MUST BE FOLLOWED BY THE USERS (if not than trick will not work):

[1] YOU MUST HAVE 20 RUPEES OF BALANCE (not more than 20 and not less than 15 rupees)
[2] ACTIVATION MESSAGE SHOULD NOT BE SENT MORE THAN ONE (this leads to re activation of gprs / internet)
[3] WITHOUT USING PROXY SERVERS NEVER OPEN ANY SECURE SITE (gmail, yahoo mail classic, gtalk etc are secure site)
[4] USE PROXY SITE AS UNDER ESPECIALLY FOR THE IDEA CELLULAR:{1} hidemyass.com{2} browse.ms{3} invisiblesurfing.com and many more can be used as proxy site….
[5] if you are using internet in to your PC or LAPTOP than use SMART BROWSER software to surf the internet instead of conventional software such as MOZILLA FIREFOX,INTERNET EXPLORER,SAFARI,NETSCAPE etc.
[6] OPERA 9.26 is also advance for surfing internet speedily.

NOTE:
1. In idea cellular when dial up connection is established there is very tedious situation is that “internet connection disconnects automatically again and again”.To avoid or to control this use RE DIALLING soft wares. My favorite RE DIALLING soft ware is “flexible dialer pro (full version)”.
2.Instead of above you can also use “CONNECTION KEEPER”. This sends data to the servers automatically and due to this connection remains alive.
3. If still you facing any other error than comment here .Try it now.

Deleting System Softwares in WINDOWS

XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything.
Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it.
You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.

Creating a desktop shortcut for locking your computer

If you use your computer in an area where others may have access to it, and there are things on your system you would rather have kept confidential, locking your desktop when you leave the computer is an essential task.
Here's a recipe for a desktop shortcut that will lock your computer in two easy clicks:
Right click on an empty area of the desktop and choose 'new' then 'shortcut.' The create shortcut wizard will open; in the first text box,
type '%windir%\System32\rundll32.exe user32.dll,LockWorkStation' and then give your shortcut an appropriate name on the next page, and hit 'finish.'

You will notice that the shortcut you created has a blank icon. To select a more appropriate one, right click on the shortcut and hit 'properties.' In the 'shortcut' tab, click the 'change icon' button.

In the 'look for icons in this file' box, type '%SystemRoot%\system32\SHELL32.dll' then click 'ok' to see a range of icons for your new shortcut. Choose an appropriate icon. Your desktop locking shortcut is now ready for use. Test it out. It is useful if u have an account as it will prompt 4 a password.

NETWORK TROUBLESHOOTING

TROUBLESHOOTING OF N.I.C CARDSN.I.C Not Sensing:
First, check for the dust on the pin of the connector. If any, clean it to ensure proper contact of the tracks. (Or cleaning solution).
If that does not solve the problem, check the crystal frequency. If it is not working, replace the crystal.
If the crystal is O.K, check if the S.M.D or any components are dry soldered. If so, resolder the components.
If that doesn’t work them replace the S.M.D. This will definitely solve the problem.
No Display If The Card Is Inserted:
Just check for the shorting on the card, because display will not come if there is any shorting. If a shorting is found, try to correct it.
If any component is shorted, try replacing the component. This will solve your problem.
N.I.C Not Connecting Through BNC As Well As UTP:
Check for any dry soldering of the components on the card. If any, resolder the same.
Check the transceivers on the card. If they are faulty, replace them with working ones.
Check for shorting of the S.M.D. Correct it, if any.
Touch up the S.M.D, in case it is dry- soldered.
Replace the main S.M.D.
N.I.C Not Connecting Through UTP Only:
In the case of the UTP, the path for the data is from the S.M.D to the transceiver & then to the cable.
Therefore, if the UTP is not working, the problem lies mainly with the transceiver. Try changing the transceiver.
If the Transceiver is O.K, try changing the delay line.
N.I.C Not Connecting Through BNC Only:
In the case of the BNC, the path for the data is from the S.M.D to the voltage converter, converter to the transceiver & then to the cable.
So, if the BNC is not working, check whether the converter is giving the proper output voltage. If it is faulty, replace it.
If the converter output is correct, then the transceiver could be faulty. Try changing the same.
If that does not help, the problem lies with the S.M.D alone. Replace it.

TROUBLESHOOTING IN MOTHERBOARD

The motherboard faults are the most challenging ones. Diagnosing its faults requires great patience. However, 80% of the problem can be detected using the DIAG CARD. But it would only give you an idea of which signal is missing accordingly to which the actual problem has to be traced out. Some of the basic faults found in motherboards are:

No Display:
The board is physically checked for any damaged. Any physically damaged parts are replaced with new ones.
Check the 3V battery. If low, replace the battery.
In cases the problem is due to improper CMOS setting, clear the CMOS with the help of the CLEAR CMOS jumper.
Check to ensure that the jumpers pertaining to CPU speed (i.e. base frequency & multiplication factor) are correct as incorrect settings may result in over clocking of the speed.
As the first step, the existing BIOS is changed with a reference working one & the board is re-checked. If the problem was with the bios, it will be solved. The original BIOS is re-programmed.
If the BIOS is not a problem, the main controller IC is checked for shorting of pins & for any physically damage. The shorting, if any, must be removed.
If the main controller IC is dry-soldered, it should be touched up.
Lastly, if the board is not working, the main controller IC is replaced. This will definitely solve the problem.

Continuous Reset High:
The reset signal on the board remains continuously high because +5V is not coming on the reset pin. Due to this, the clock & the other signals are not generated.
Firstly, the voltages on the reset pins of the external connector are checked.
One pin has to have +5V& the other ground.
Mostly the +5V pin carries less voltage. In this case, an external wire jumper is connected from pin b3 of the slot to the pin. Connecting the wire jumper solves the problem in most of the cases.
If this does not solve the problem, we check the voltages of the different regulators on the board. If any one is found fault

Making password disk in windows xp

If anyone who have a problem of forgetting password,
here i have a solution of this prob,for this u need a floppy disc

1st of all open control panel n the click on users accounts and choose the account of which u want to make password diskn

click on a option given at right side of screen "prevent forgotten password" before clicking it please insert floppy discs in the drive this will copy some important files to prevent you by this problem,after a min it will finish the process,
and next time if u have forgotten the password u n access your account by this password disk.

Cheat of Heart Game

Hearts
This Egg works ONLY with the Windows 95 and 98 releases of Microsoft Hearts. (Mshearts.exe).
1. Run Regedit.exe (the Win9x Registry editor, located in your Win9x folder) and go to: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Hearts
2. In the right hand pane add a new String and name it "zb" (no quotes).
3. Give it a value of 42.
4. Now run Mshearts.exe and during gameplay press Ctrl + Alt + Shift + F12 the same time.

MinesweeperAfter starting the game, type xyzzy and press Shift and Enter at the same time. Move the mouse over the playing area and keep your eye on the upper left corner of the Windows desktop. A white pixel will appear when the mouse pointer is over a safe square, and turn dark when the mouse is over a mine.

Cheats of window games of XP

Freecell
Start the Game.
1. Hold down Ctrl + Shift + F10 together.
2. A dialog box shows up with 4 choices: Abort, Win, Retry or Cancel.
3. Click Abort and move (drag) any card to the top to win the game.
UPDATES:
1. Check this other FreeCell cheat, courtesy of Ari Lintula (ari.lintula@dlc.fi):"Start a game. If you have moved a wrong card, quickly press F10 before clicking another card. It's the Undo button."
2. To sort all cards by color and in:- ascending order: click Game -> click Select Game (hit F3) -> click Yes to cancel game in progress -> type -1 -> click OK.-
descending order: click Game -> click Select Game (hit F3) -> click Yes to cancel game in progress -> type -2 -> click OK.

Hidden music in win xp

If u r having any material like important docs and u r afraid about it . Dont worry, windows XP provides (not officialy ) a utility by which u can hide urs one or more drives.
Here is the step by step procedure how to hide any partition/drive :
1. Go to Start > run > type “diskpart”.
A DOS window will appear with following description.DISKPART>
2. Then type “list volume”
The result will look like : ——
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 F CD-ROM
Volume 1 C Programmea NTFS Partition 15GB Healthy System
Volume 2 D Softwares NTFS Partition 20GB Healthy
Volume 3 E Documents NTFS Partition 30GB Healthy
Volume 4 F Abi NTFS Partition 10GB Healthy

3. Suppose u wanna hide drive E then type “select volume 3".(without quotes)Then a message will appear in same winwods { Volume 3 is the selected volume}

4. Now type “remove letter E”
Now a message will come { Diskpart Removed the Drive letter }

Diskpart will remove the letter .Windows XP is not having capabilty to identify the unkown volume.
Your Data is safe now from all unauthorised users.
To access the content of hidden Drive repeat the process mentioned above.But in 4th step replace” remove” to “assign”i mean type “assign letter E”Never hide C:/ drive… otherwise ur system will not work

Show your designed wallpaper while booting

To start with just a simple one. Guess many of us knows this one that how to show your own image or name while PC boots up. In Windows 98 it was possible by editing the logol.bmp file. But in XP, simply u need to edit a registry value.
First create a BMP file as u want. Its size should be at least 800*600 and save it.
Go to run.Type "regedit" press enter.
In registry editor navigate to "HKEY_USERS\.DEFAULT\Control Panel\Desktop".
U will find a value called "wallpaper" there.
Double click that and set the value to the location of the BMP file (with Full Path. Eg: C:\Wallpaper\xyz.bmp).
If the value called wallpaper is not present then create a new string value and name it as Wallpaper and set its value.Now Reboot. Your designed wallpaper will b shown just before the welcome screen appears.

Making all files and folders open fast

Go to Start then Run
Type 'Regedit' then click 'Ok'
Find "HKEY_CURRENT_USER\Control Panel\Desktop\"
Select "MenuShowDelay"
Right click and select "Modify'
Reduce the number to around "100"

This is the delay time before a menu is opened. You can set it to "0" but it can make windows really hard to use as menus will open if you just look at them - well move your mouse over them anyway. I tend to go for anywhere between 50-150 depending on my mood.

Make your Pdf files to speak

Here are the shortcuts for hearing Pdf files in Abobe reader 6.0 or higher..

first activate read loud out........

press shift+ctrl+y.......then press

Ctrl+Shift+B ---->To hear the whole Topic.

Ctrl+Shift+V ---->To hear the Page.

you can also check read out loud option is activated or not from view option......

Breaking The XP Password:

Breaking The XP Password:
In case of user password boot the pc in safemode by pressing the F8 key and then selecting the Safe Mode option.
You can now logon as an administrator and XP wont prompt for the password. Incase of an administrator account try rebooting the pc in DOS.
access C:\Windows\system32\config\sam . Rename SAM as SAM.mjNow XP wont ask for password next time You Login. AlsoGo to the cmd prompt .
Type net user *. It will list all the users.
Again type net user "administrator" or the name of the administrator "name" *. e.g.: net user aaaaaa *(where aaaaaa is the name).
It will ask for the password.
Type the password and there you are done.
Logging In As Administrator:Hold the Ctrl-Alt key and press Del twice.
This will bring up the normal login and you can log on as Administrator.
To unhide the Administrator account so it does show up:
Start Regedit Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList Unhide the Administrator key by giving it a value of 1

Renaming Recycle bin

Browse Through Registry forHKEY_CLASSES_ROOT/CLSID/{645FF040-5081-101B-9F08-00AA002F954E}and change the name "Recycle Bin" to whatever you want (don't type any quotes

CHANGE COLOR OF COMMAND PROMPT WINDOWS XP!!!

To customize the colors of the Command Prompt Window Screen Background and Screen Text, first open a Command Prompt Window:
Click Start - Run - type "cmd" (without the quotes).
Once the Command Prompt Window opens, Click the Control Box in the top left corner of the Command Prompt Window (the button that looks like a C:\ Prompt).
Once the Menu opens, Click Properties - Colors - Screen Background - and change this to whatever color you wish to use, in the Selected Screen Colors dialog box, as you make different choices.
Do the same for Screen Text.
As you can see, there are other options you can change here as well.
Once you're finished, Click OK, then type "exit" at the Command Prompt to exit the Command Prompt Window (without the quotes).

Renaming The Start Button:

Renaming The Start Button:
To rename the start button, you will need a hex editor.
My preference is UltraEditCopy the \windows\explore.exe file to a new name (e.g. explorer_1.exe) With the hex editor,
open that file and go to offset 412b6 You will see the word start with blanks between each letter Edit it be any 5 characters or less Save the file Boot to DOS
Copy the existing c:\windows\explorer.exe to explorer.org Copy explorer_1.exe to explorer.exe You will also need to replace the explorer.exe in the c:\windows\system32\dllcache file as well with the new one.
Note: If the partition is NTFS and you can't access the files from DOS:Start Regedit Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon. Change the value of Shell from Explorer.exe to explorer_1.exe

To Increase the Internet Speed

To Increase the Internet Speed:Open Notepad and paste the below code in it. [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters]
"SackOpts"=dword:00000001
"TcpWindowSize"=dword:0005ae4c
"Tcp1323Opts"=dword:00000003
"DefaultTTL"=dword:00000040
"EnablePMTUBHDetect"=dword:00000000
"EnablePMTUDiscovery"=dword:00000001
"GlobalMaxTcpWindowSize"=dword:0005ae4c
Now save this file as speed.reg. Execute it and observe the change!

FOR UNBLOCKING AND BLOCKING WEBSITES

For unblocking and blocking websites
FOR BLOCKINGDo The Following :For eg you want to block www.xyz.com !* Open the folder C:\WINDOWS\system32\drivers\etc* There you will find a file named HOSTS* Click on the file and press SHIFT and now right click on it .* From the right click menu select Open with .* Now, select Notepad to open the file from the list !* Now, in the file under the line 127.0.0.1 localhost add another line as 127.0.0.2 www.xyz.com.* Now, File>>Save !For unblocking just follow the same procedure vice versa...!!!!!

9. SHOW UR NAME IN DA SYSTEM CLOCK!!!
This trick will put your name or any text up to 12 characters long in the system clock. There is nothing special in this trick. It is just to show off to your friends that you are elite. Here is how to do it.1. Go to Control Panel and double click on Regional and Language Options.2. Click on Customize and go to Time tab.3. To put your name, just click on the scroll down text and rename it with anything you want. 4. Finally, click Ok and Ok to accept the changes.[red[Just incase you want to get back to the original setting, just pick the AM and PM from the drop down list. Using windows vista? Don’t worry, this trick also works in Windows Vista